Fusion AP
With convenient features and a smooth, ergonomic handle, the Fusion AP will give you days of spraying without fatigue.
- Air-blast tip cleaning reduces build-up and tip clogging
- Hardened stainless steel mix chambers are built to last
- Longer life side seals reduce maintenance and let you spray a wider range of materials – stainless steel or PolyCarballoy options
- Advanced mix module and tip design improves mixing
- Solvent-resistant components and O-rings let you soak the whole gun without swelling or damage
- Daily maintenance in a matter of seconds with the quick-shot grease port
- Easy-to-use design makes maintenance quick and easy
| Fusion AP Gun | |
|---|---|
| Materials Sprayed | Foam & Coatings |
| Maximum Output | 50 lbs/ min (22.7 kg/ min) |
| Minimum Output | 3 lb/ min (1.4 kg / min) |
| Maximum Fluid Working Pressure | 3500 psi (240 bar, 24.0 MPa) |
| Maximum Working Air Input Pressure | 130 psi (9 bar, 0.9 MPa) |
| Maximum Fluid Temperature | 200°F (93°C) |
| Weight (with Manifold) | 3.26 lbs (1.48 kg) |
| Air Inlet Size | ¼ npt(quick disconnect nipple) |
| Gun Dimensions | 7.5x 8.1 x 3.3 in (19 x 20.6 x 8.4 cm) |
| Applications | Residential Foam Insulation, Roofing, Concrete, Waterproofing and Other Polyurethane Foams & Elastomeric Coatings |